Questions and answers
The questions customers ask us most. For how a service visit works, fees and estimates, see What to expect.
How much will my repair cost?
Every repair is different. A service call can range from a half-hour in-and-out visit to upgrading a sealed system from R12 to R134a.
What we will do is diagnose the appliance first and explain the repair options before major work begins. The total cost depends on the parts required and the time involved. Our goal is to help you make an informed repair-or-replace decision, not to surprise you at the end of the visit.
For a point of reference, our average customer-pay repair in 2026 has been about $720, including GST. Our customers aren’t average, so that number may not be all that helpful. In today’s economy, dinner out for four at a nice restaurant, drinks included, might sum it up.
How soon can you come?
Our goal is next-business-day service for most of Calgary. With today’s technician shortage we can’t always meet it, but our customer liaison will always be upfront with you about when we can get there.
What should I do if something goes wrong when the office is closed?
If you smell gas, leave the house first, then call ATCO Gas or 911 from outside.
Fridge not cooling: try a power cycle. Unplug the refrigerator and leave it unplugged for sixty seconds, or, if the breaker is easier to find than the plug, switch the breaker off for sixty seconds and then back on. If that doesn’t help, put a large bowl of ice on a shelf in the fresh-food section, keep the door closed as much as possible, and refresh the ice as needed. Sub-Zero refrigerators are well insulated, and this can slow spoilage.
Freezer not cooling: options are limited. Keep the door closed as much as possible. If food is already going soft, the freezer has likely not been cooling for days, not hours.
Water leaking: look for the shut-off valve. An ice maker’s is often in the utility room or under the kitchen sink: a line coming off the cold-water side with a valve, then running through the floor. A dishwasher’s is almost always in the sink cabinet closest to it, usually on the hot-water side. Nothing in the building code requires shut-offs to be easy to reach or labelled, so as a last resort, use the main shut-off for the house, just before or after the water meter.
My appliance is under the manufacturer’s warranty. Do I pay anything?
Generally, no. Vantage passes on the full manufacturer’s warranty. Exact coverage is set by the manufacturer, but if you own a Sub-Zero, Wolf or Cove appliance, expect to pay nothing in the first two years from the date it was installed.
Misuse, abuse, or a delivery or installation error can void all or part of that coverage. Sub-Zero, Wolf and Cove very rarely apply those exclusions, and they are always open to a conversation if for any reason we can’t do the repair under warranty. A Vantage representative will never void or limit your warranty on our own; any such decision includes a conversation with the manufacturer.
Sub-Zero, Wolf and Cove are known for their warranties and long service lives. If you are entitled to warranty benefits beyond the standard two years, we will apply them to your repair. Our software, Fieldwright Intelligence, checks every work order against the manufacturer’s registration details so nothing gets missed.
Why are factory-certified technicians important?
In short, a factory-certified technician is accountable to both the factory and the customer for the best possible service, and has the manufacturer’s resources behind them to get the best possible result.
The terms matter: certified is not the same as authorized. Many companies call themselves authorized because the manufacturer has no recourse against the claim. Sadly, “authorized” does not mean the technician has the tools, the training or the manufacturer’s backing.
Will my technician be an employee or a subcontractor?
An employee. Vantage Appliances Inc. has never used subcontractors. We encourage our employees to make Vantage their only source of income, which is a big ask in today’s economy. Our reasoning: we expect a lot for our customers, and the flip side is that we have to provide the best possible incomes for our employees. Our technicians drive company vehicles stocked with company-supplied parts, and much of their diagnostic tools and equipment is company-provided as well.
Will the technician know my appliance’s history?
Very likely. We have eighteen years of our own records on every product we have serviced, and we can access the manufacturer’s records if your appliance was serviced by another authorized servicer. In short, if we have worked on it, or it was worked on under warranty, we should have the history.
Why might parts take time to get?
First, Vantage stocks parts, both at the office and on our service vehicles. That doesn’t mean we have every part for every model. If we need to come back with a part, the service call is not charged again: your repair is billed as one service call, plus labour and parts, just as if it had been finished on the first trip. We understand a second trip is an inconvenience for you; for us it is lost revenue, so our incentive is to fix it the first time.
If we don’t have the part with us, the technician can tell you whether it is in our main stock or at our supplier, so you know as much as we do about getting it. When it isn’t in stock at either, we are completely transparent, and you can count on us to pull every lever to get it as quickly as we can.
Is my older appliance worth fixing?
We repair Sub-Zero and Wolf appliances up to forty years old, an outstanding commitment by these manufacturers to their customers and to the environment. Models vary, but here is the thing to know: these appliances don’t fail beyond repair. What happens is that a part is no longer available, or the repair feels too expensive for the age of the unit.
You will never hear us say your appliance isn’t worth fixing. We like to feel a repair can pay for itself over the next five to ten years, and if we aren’t sure it can, we’ll tell you what we think. The decision is always yours.
Do you service other brands?
Sub-Zero, Wolf and Cove are our core, along with out-of-warranty Asko. We are adding Thermador, Gaggenau and Bosch; it will take time to reach the comfort level we have with our core brands, but we have no doubt we’ll get there. We don’t provide Viking warranty service, but we’re happy to look at a Viking that is out of warranty. If your brand isn’t on our list, our liaison keeps a list of other servicers and can point you to one.
Do you offer yearly maintenance?
Keeping the condenser clean is the best thing you can do for a Sub-Zero, and it’s a straightforward job if you’re comfortable with tools and working on a ladder. If you’re not, we can arrange a yearly visit to clean the condenser, run the diagnostics, replace filters, and update the software if needed.
I live outside Calgary. Does it cost more?
It can. Outside Calgary there may be additional mileage or service call fees, and our liaison will fill you in when you book. We group out-of-town calls where we can to keep the cost down. In the city, some areas have no free street parking, and there we have to charge extra. If you live in a residents-only parking zone, please be ready to register our service truck’s licence plate when we arrive.
Can someone else let you in?
Yes, if we can get in and you are comfortable with the arrangement. Our staff are told to work the same way whether a client is watching or not. Information is gold: the more the person letting us in can tell us about the problem, the more we have to work with.
What if I need to cancel, or won’t be home?
Kindness counts. We book every day to the limit of our resources, so when a customer cancels or isn’t home when we arrive, it’s a double hit: we lose that call, and another customer waited who didn’t have to. We know life happens, and when it does we won’t send you a bill. All we ask is as much notice as you can give.
